Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Getting your trailer leveled shouldn’t be an all-day project. The Lippert High-Speed Power Stabilizer Jack makes it quick and steady with a motor that’s twice as fast as earlier versions and legs that extend up to 30" for plenty of reach. With the flip of the included white switch, the jacks extend or retract smoothly so your setup feels solid in minutes instead of hours.
Outdoor gear lives hard, and these jacks are made to handle it. The entire assembly is built from heavy-gauge steel to stay rigid under load, while the black powder coat finish fights corrosion from rain, dust, and road grime. Whether you’re parked near salt air or storing long-term outside, that durable coating helps keep everything moving freely season after season.
No campsite is perfectly level, but this power stabilizer doesn’t need it to be. The motor automatically adjusts both legs to match the terrain, keeping your trailer stable on uneven spots without extra blocks or guesswork. Each leg operates independently for better control and a rock-solid feel once you’re parked.
Bolting this system to your existing frame is straightforward thanks to pre-set mounting holes spaced 68-11/16" center-to-center. It includes a white switch housing, power switch, 6-amp auto-reset breaker, and all necessary mounting hardware so you can get up and running without chasing down extra parts. Once installed, setup and teardown are as easy as flipping a switch.
The 12-volt DC motor runs directly from your trailer’s battery for dependable performance wherever you camp. A built-in 6-amp auto-reset circuit breaker protects the electronics from overloads while keeping everything ready for use when you need it most. It’s a simple, tough system designed for years of trouble-free stabilizing.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
Ratings & Reviews
Purchased as a replacement for another electric set. The new jacks operate differently and automatically adjust for uneven ground. Also operates much faster than the old one. Same mounting as old one.
Received product exactly as ordered. Nothing missing. No Damage. Shipping was free and product arrived in 3 days. Can't ask for better than that. Installed the part same day received, works perfectly. Etrailer always has great prices and the product I need. Will use them again if needed.
Product raises and lowers as promised. Very stable. Had to reach out to customer service and they were prompt and satisfying with the response. Will definitely order with e-trailer again.
I received it early. Thank you. I am unable to find a wiring diagram. I was told there would be one. The wiring to hook up the switch is very short. It is only one foot. I thought it would be at least 18 inches. I am putting this switch box on the out side of trailer. I do not want to spice the wire.
This was the easiest install of a product that I have ever bought. It bolted right up to the brackets under my Cougar XLite 33RES with no problem. Hooked up the power and within 30 minutes I have working stabilizer. I will purchase another one for the back within the month. I cannot say enough about this experience.
This is a Great Stabilizer,well worth the money!Thanks for a Great Product!
Don
8/1/2019
The Best,it really makes life easier and stabilizes the camper,Thanks
Very pleased to order stabilizer for our fifth wheel while on the road and it arrived the third business day. WOW! The rep at eTrailer was well informed on product and understood quickly and I felt assured our product would be ordered and delivered quickly. On the road and able to get back on the road quickly was awesome. VRC
Replaced a damaged stabilizer with this new one. So much faster and quieter. Will replace the other one once needed with this one. As always fast shipping and in stock. Thank you
This was a direct replacement for the damaged jack. It was an easy bolt on unit and has been working great for several cycles.
Jack worked well. Dimensions different than original even though I ordered by part number so I had to redrill frame etc…. To mount.
Ordered the rear electric jacks for my fifth wheel toy hauler on Saturday and they were delivered the following Tuesday !!! It took less than a hour to install them, They fit perfectly !! Most of that time was removing the old ones !! The only issue I had was that they only supplied 4 bolts to put the new jack up with and there were 4 holes per side. Was not comfortable with 2 bolts per side. Great company to deal with and I will continue to order parts for my fifth wheel in the future !! Nice job guys !!
After using the 6k lbs for my 14k fifth wheel for a year, I can honestly say there are no issues or complaints. Wife is a travel nurse and we live in our trailer. It does an amazing job of stabilizing the rear end of the trailer.
Ordered a power stabilizer jack for my 2012 Jayco fifth wheel in 2023 , easy to install the item myself , stabilizer working great , will buy future items at this site , thanks
This was a replacement for our damaged rear stabilizer legs. Installation for me was 30 minutes; the holes lined up and only 2 connections required for my existing switch. My old stabilizer was a Lippert as well, but the motor on this one sounds healthier and seems slightly faster.
If you don’t already have a similar system, understand that this is not intended to lift or level your RV. Once you get it leveled, drop these legs to “plant” the bag and reduce wobbling and movement. I use manual scissor jacks to level. And always place this last when setting up and take them up first when closing up. I took my scissor jacks out before raising these legs the last time we moved and these are not strong enough to hold the weight of our large 5th wheel, so one of the legs and the frame buckled, hence the replacement.
Excellent product. Arrived on time. Easy to install. The trailer I installed it on was a 2018 Cedar Creek Silverback 41.5 ft. The frame was at the products maximum width It did just fit and as a stabilizer jack worked well. Stopped the back of the trailer from moving. If the factory could make this unit a couple of inches wider that would be good. Like I said it does fit and works well.
The product is perfect. Added it to a fifth wheel that was a bit shaky with the Lippert 2.0 auto level system. Easily 90% better. Shipping errors from Lippert and a long back order time gap cost a star on the rating. When it finally arrived the white switch was black (no big deal, new install so I could just move to the skirt). It was also missing the weather guard switch box, which etrailer had Lippert ship to me at no charge. I had noted the black switch and was clear it was okay as long as the box was black as well. I had mounted the switch in the skirt (needed the jack) and would only need to enlarge the cutout and re-wire when the box came in. It arrived today, white of course to match the switch that was supposed to be white but arrived black. Silver lining is that the switch is far better than the old styles and is sealed, so I will leave as is.
Product just as advertised, works great and thanks for the quick shipping. Will continue to make etrailer my first choice when in need of parts.
Roy G.
5/15/2020
Still doing the job
Installed well. Only complaint is the web picture showed yellow arms, the on i got had orange. Will need to paint one or the other to match.
This stabilizer works very well. I replaced the original Lippert unit on my 2008 5th wheel as the parts I needed were no longer available. The original Lippert unit worked great until some idiot in a drunken stupor decided to move it with the stabilizer in the “down” position. I probably won’t do that again anytime soon. DOH!!!
Rarebear
5/3/2021
Still works perfect. Seriously, a great product!
This unit works so much better than the previous unit originally installed on the trailer during its manufacturing. As its title states, it is high speed compared to the previous jack. It is self leveling, a big improvement over the older unit.
Bill F.
8/28/2021
Working great after a year. Highly recommend this product.
Pros: Works better than I anticipated. Looks great and has better ground clearance than the stock scissor-jack stabilizers.
Cons: Installation instructions/documentation weak or non-existent. If all of the instructions, wiring diagrams and documentation were in one place on the web page under a separate tab rather than having to dig through the reviews and the Q & A’s, I would have given this a 5 star rating.
I ordered the LCI Power Stabilizer Jacks with the white switch Kit (LC369774) because I wanted the switches mounted in the camper wall so they would be better protected than if they were mounted in the flimsy fender skirts of my camper. I also needed the bolt-on spacer kit (LC673594) for both the front and rear jacks to clear a propane line that runs along the length of the frame. Installation was relatively easy, although there are NO instructions on how to install the spacers kits; the video on etrailer.com was no help whatsoever with the installation. I bolted the jack mount brackets to the shorter side of the spacers using carriage bolts and flange nuts; the slotted holes in the spacers accepted the carriage bolts, aligned perfectly with the holes in the jack mounts, and allowed me to install them without having to try to fit a wrench inside. Then it was just a matter of drilling holes in the frame at the appropriate spacing for flange bolts/nuts through the slotted holes on the end of spacers. I was very pleased with how the switches and the switch compartments looked once installed. Again, though, it took lots of digging to find the wiring diagram and then the matrix for the switch wire colors, because the wires on the white switch are colored differently than the black switch that all of the diagrams show. Also, it states on the jack installation instruction sheet that the power must be a minimum of 10 gauge wire (AWG-10), but nowhere on the wiring diagram does it say anything about that. AWG-10 is a MUST because of the way current drops over a distance. In the case of my camper, it is a 30 foot run which requires that gauge of wire for 20 AMPs.
Mark R.
3/10/2020
1 Year Follow-up: The stabilizer jacks are great. We made a six-week, 22-stop, 8000-mile around-the-country trip and the jacks performed flawlessly. Setting up and breaking camp were completed easier and quicker. The only issue I have had is that the extend/retract switches will occasionally stick in the on position, so I just have to watch and make sure they turn back off. I would definitely recommend the jacks to anyone looking to make their camping experience easier.
The stabilizer works well. I would buy it again
Forrest
9/18/2025
My Lippert stabilizer has been working flawless for over a year. Great product no problems. My suggestion would be to use this product as a stabilizer and do not attempt to put much pressure on them. The arms will crumble.
Item arrived as expected and in good quality. Would recommend this seller.
Great product, fast shipping
The folks at e trailer are super helpful and gave me the proper information for my new stabilizers. Everything went smooth on the install and it took less then 2 hours. Super happy, thank you E trailer!!!
Kate F.
6/5/2026
Thanks for your review, David! We're happy to hear our team was able to help you find the right stabilizers for your setup. It's great that the installation went smoothly and took less than two hours to complete. We appreciate your kind words and are glad everything worked out so well. What trip are you looking most forward to this summer?
Do you have a question about this Camper Jack?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Don
8/1/2019
Its Great